はじめに

A guide to replace a damaged, lost, or broken button cluster.

Place the Palm IIIx face down on a flat surface.
  • Place the Palm IIIx face down on a flat surface.

コメントを追加する

Push down, lift up on, and remove battery cover.
  • Push down, lift up on, and remove battery cover.

コメントを追加する

Remove the old batteries one at a time.
  • Remove the old batteries one at a time.

コメントを追加する

Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.
  • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

コメントを追加する

Hold the device on its side, positioning your hands as shown.
  • Hold the device on its side, positioning your hands as shown.

  • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers

コメントを追加する

Hold the screen and front cover in a vertical position, facing the screen inward, as shown.
  • Hold the screen and front cover in a vertical position, facing the screen inward, as shown.

    • Position your hands so you can push the screen outward with your thumbs.

  • Remove the front cover by gently pushing outward with your thumbs. Use your index fingers to pull back on the front cover.

コメントを追加する

Remove cluster by pulling on the rubber backing.
  • Remove cluster by pulling on the rubber backing.

    • Clean, repair, and/or replace as neccessary.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

David Haskell

メンバー登録日: 2010年01月21日

44 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 14-43, Regan Winter 2010 Cal Poly, Team 14-43, Regan Winter 2010人のメンバー

CPSU-REGAN-W10S14G43

5 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,188