はじめに

The PSP's buttons may become jammed or may not function properly. This guide will show how to access the buttons for repair, cleaning, or replacement.

パーツ

パーツは必要ありません。

  1. Turn the PSP over so its back is facing you.
    • Turn the PSP over so its back is facing you.

  2. Locate the battery casing button on the rear-left side of the PSP. Press down the button and remove the battery cover.
    • Locate the battery casing button on the rear-left side of the PSP.

    • Press down the button and remove the battery cover.

  3. Using your finger, remove the battery upwards from the system as shown. Using your finger, remove the battery upwards from the system as shown.
    • Using your finger, remove the battery upwards from the system as shown.

  4. Remove the four screws shown with a Phillips #00 screwdriver. You will have to peel back the guarantee sticker to access the screw on the lower left.
    • Remove the four screws shown with a Phillips #00 screwdriver.

    • You will have to peel back the guarantee sticker to access the screw on the lower left.

  5. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Remove the screw from the bottom side of the PSP. Keep it separated from the rest of the screws.
    • Remove the screw from the bottom side of the PSP. Keep it separated from the rest of the screws.

    • Remove screws from back righthand side within the holes.

  7. Gently separate the outer plastic casing from the rest of the system as shown. Gently separate the outer plastic casing from the rest of the system as shown.
    • Gently separate the outer plastic casing from the rest of the system as shown.

  8. If the Arrow Buttons are not functioning properly, flip over the outer casing and locate the inside of the buttons, as shown Carefully remove the black rubber backing off of the buttons. Clean the inside of the rubber  and the outside of the buttons with a cloth.
    • If the Arrow Buttons are not functioning properly, flip over the outer casing and locate the inside of the buttons, as shown

    • Carefully remove the black rubber backing off of the buttons.

    • Clean the inside of the rubber and the outside of the buttons with a cloth.

  9. If needed, replace the old buttons with a new set (which can be purchased from Sony or other electronics stores). Carefully re-insert the buttons. This should not require excess force, as the buttons should fit if they are arranged correctly.
    • If needed, replace the old buttons with a new set (which can be purchased from Sony or other electronics stores).

    • Carefully re-insert the buttons. This should not require excess force, as the buttons should fit if they are arranged correctly.

    • Gently re-apply the back rubber to the back of the buttons.

  10. If function buttons (x, square, circle, triangle) need to be replaced, find the corresponding black rubber backing on the inside of the casing. Carefully remove the back rubber to expose the rear side of the buttons as shown. (This can be done using your hands.)
    • If function buttons (x, square, circle, triangle) need to be replaced, find the corresponding black rubber backing on the inside of the casing.

    • Carefully remove the back rubber to expose the rear side of the buttons as shown. (This can be done using your hands.)

  11. Next, carefully clean the receiving end of the buttons on the motherboard (shown on picture) with a cloth. If the buttons are clearly damaged, then they need to be replaced.
    • Next, carefully clean the receiving end of the buttons on the motherboard (shown on picture) with a cloth.

    • If the buttons are clearly damaged, then they need to be replaced.

    • Add the new ones in the form, with the correct button order. (The correct button order has the Triangle on the top, Square on the right, Circle on the left, and X on the bottom).

    • Be very careful! The buttons only go in one way. If you have trouble fitting them in, rotate them in their given spots until they fit in easily. Do NOT force them. Forcing the buttons in may cause damage.

  12. Once buttons are correctly replaced, the back rubbers are fit back onto the buttons, refer back to Replacing the Housing to reattach the casing.
    • Once buttons are correctly replaced, the back rubbers are fit back onto the buttons, refer back to Replacing the Housing to reattach the casing.

まとめ

To reassemble your device, follow these instructions in reverse order.

25 の人々がこのガイドを完成させました。

Henry Lee

メンバー登録日: 2010年01月14日

569 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 5-6, Forte Winter 2010 Cal Poly, Team 5-6, Forte Winter 2010人のメンバー

CPSU-FORTE-W10S5G6

5 メンバー

10のガイドは作成済み

It's a helpful guide,thx

Zero Knight - 返信

Great guide. I highly Recomend this to anyone that needs to replace their PSP buttons

unashamed45 - 返信

Otimo guia recomendo.

richardmosman - 返信

use magnetised screwdriver i had a normal one and it was a pain in the ass to put those tiny little bastards back

Nagy Dániel - 返信

Thank you this was a great guide

BLAISE of BASH - 返信

統計データを表示:

過去 24時間: 6

過去 7 日: 65

過去 30 日: 309

今までの合計 59,398