はじめに
The gear shaft is responsible for spinning the blades.
必要な工具と部品
-
-
Use the prying tools to open the four plastic screw holes on the bottom of the blender.
-
-
-
-
Remove the screw on top of the fan with the 4mm socket stock wrench.
-
Remove the fan and washer.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。