メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Oster 3905 Outer Shell Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Oster 3905 Outer Shell Replacement, Slot Levers: 手順 1、 1の画像 1
    • Firmly grip your hand around the slot lever.

  2. Oster 3905 Outer Shell Replacement: 手順 2、 1の画像 1
    • Stabilize the toaster by placing your hand on top.

  3. Oster 3905 Outer Shell Replacement: 手順 3、 2の画像 1 Oster 3905 Outer Shell Replacement: 手順 3、 2の画像 2
    • Forcefully pull the slot lever away from the toaster by keeping parallel to the table.

  4. Oster 3905 Outer Shell Replacement: 手順 4、 1の画像 1
    • Both slot levers can be removed.

  5. Oster 3905 Outer Shell Replacement, Outer Shell: 手順 5、 1の画像 1
    • Place the toaster upside down so the bottom is facing the ceiling.

  6. Oster 3905 Outer Shell Replacement: 手順 6、 2の画像 1 Oster 3905 Outer Shell Replacement: 手順 6、 2の画像 2
    • Take off both rubber feet using a small metal spudger.

    • Wedge a spudger under the feet and pull up to pop off.

  7. Oster 3905 Outer Shell Replacement: 手順 7、 1の画像 1
    • Use a PH#2 screw bit to remove eight 12mm screws that are located around the perimeter.

    • There are two screws under the rubber feet.

  8. Oster 3905 Outer Shell Replacement: 手順 8、 1の画像 1
    • Place the toaster right side up.

  9. Oster 3905 Outer Shell Replacement: 手順 9、 2の画像 1 Oster 3905 Outer Shell Replacement: 手順 9、 2の画像 2
    • Grab the outer shell firmly and pull up towards the face of the toaster.

  10. Oster 3905 Outer Shell Replacement: 手順 10、 1の画像 1
    • For this part, you might need to wiggle the toaster to get the outer shell off.

    • The shell will not completely come off until the motherboard is removed in the next step.

  11. Oster 3905 Outer Shell Replacement: 手順 11、 3の画像 1 Oster 3905 Outer Shell Replacement: 手順 11、 3の画像 2 Oster 3905 Outer Shell Replacement: 手順 11、 3の画像 3
    • Use a J1 screw bit to unscrew eight 8mm screws from the motherboard.

  12. Oster 3905 Outer Shell Replacement: 手順 12、 2の画像 1 Oster 3905 Outer Shell Replacement: 手順 12、 2の画像 2
    • Take out the grey “cancel” and “bagel” buttons from the shell.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Melissa

メンバー登録日: 09/12/16

198 ポイント

1ガイドが承認済み

チーム

CSU Fullerton, Team 2-1, Bruce Fall 2016 CSU Fullerton, Team 2-1, Bruce Fall 2016人のメンバー

CSUF-BRUCE-F16S2G1

5 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 122