メインコンテンツにスキップ

はじめに

This guide will show you how to replace the orange back case from your Oregon Scientific Meep! X2 tablet.

パーツ

パーツは指定されていません。

  1. Remove the orange covers from the left and right sides of the device by sliding up against the tabs.
    • Remove the orange covers from the left and right sides of the device by sliding up against the tabs.

  2. You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device. You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device. You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.
    • You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.

  3. Use the plastic opening tools to undo the clips around the edges of the device. Use the plastic opening tools to undo the clips around the edges of the device. Use the plastic opening tools to undo the clips around the edges of the device.
    • Use the plastic opening tools to undo the clips around the edges of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

J'mel Henneman

メンバー登録日: 2015年01月20日

864 ポイント

8のガイドは作成済み

チーム

USF Tampa, Team 9-1, Blackwell Winter 2015 USF Tampa, Team 9-1, Blackwell Winter 2015人のメンバー

USFT-BLACKWELL-W15S9G1

3 メンバー

16のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 184