メインコンテンツにスキップ

Ordro HDV-D395 Lens Replacement

必要な工具と部品

  1. Ordro HDV-D395 Lens Replacement, Lens: 手順 1、 2の画像 1 Ordro HDV-D395 Lens Replacement, Lens: 手順 1、 2の画像 2
    • Pull the slider labeled open, on the bottom right, to unlock the battery.

  2. Ordro HDV-D395 Lens Replacement: 手順 2、 1の画像 1
    • Pull battery out of slot.

  3. Ordro HDV-D395 Lens Replacement: 手順 3、 1の画像 1
    • Remove the three screws (length 7.7 mm) from the bottom of the outer case using a JIS000 screwdriver.

  4. Ordro HDV-D395 Lens Replacement: 手順 4、 2の画像 1 Ordro HDV-D395 Lens Replacement: 手順 4、 2の画像 2
    • Remove plastic casing hiding screws from the strap side of the casing.

    • Unscrew the three screws (length 4.75 mm) using a PH000 screwdriver.

    • Unscrew the two screws (length 6.4 mm) using a JIS000 screwdriver.

  5. Ordro HDV-D395 Lens Replacement: 手順 5、 1の画像 1
    • Unscrew the four screws (2.9 mm length) from the screen side of the casing using a JIS000 screwdriver.

  6. Ordro HDV-D395 Lens Replacement: 手順 6、 1の画像 1
    • Remove both side casings by gripping the sides with your hands and pulling gently.

  7. Ordro HDV-D395 Lens Replacement: 手順 7、 3の画像 1 Ordro HDV-D395 Lens Replacement: 手順 7、 3の画像 2 Ordro HDV-D395 Lens Replacement: 手順 7、 3の画像 3
    • Although it requires extra steps, it is advised that you remove the motherboard and screen to ensure that nothing is damaged in the process of replacing the lens.

    • Unscrew the seven screws (length 4.22 mm) from the motherboard using a PH000 screwdriver.

    • Pull out or desolder all connected cords from motherboard.

  8. Ordro HDV-D395 Lens Replacement: 手順 8、 2の画像 1 Ordro HDV-D395 Lens Replacement: 手順 8、 2の画像 2
    • Remove top of the casing to reveal the screws on lens.

    • Unscrew the four screws (size 4.90 mm) using a PH00 screwdriver.

  9. Ordro HDV-D395 Lens Replacement: 手順 9、 3の画像 1 Ordro HDV-D395 Lens Replacement: 手順 9、 3の画像 2 Ordro HDV-D395 Lens Replacement: 手順 9、 3の画像 3
    • Pull out lens.

    • Remove cord from lens.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Nathan Mcintyre

メンバー登録日: 11/05/18

303 ポイント

2のガイドは作成済み

チーム

IUPUI, Team S1-G3, Baechle Fall 2018 IUPUI, Team S1-G3, Baechle Fall 2018人のメンバー

IUPUI-BAECHLE-F18S1G3

3 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 222