Optoma HD72 Upper Case Replacement

はじめに

Use this guide to replace the upper case on an Optoma HD72 projector.

Use a Phillips screwdriver to remove the five 2 mm screws on the underside of the device.

Flip the device over and slightly lift the upper case, with care not to strain the two cables.
Disconnect the two cables that connect the top case to the motherboard.
Lift the upper case up and off.

終わりに

To reassemble your device, follow these instructions in reverse order.

メンバー登録日: 03/29/22

8,431 ポイント

42のガイドは作成済み

Staff

140 メンバー

18,077のガイドは作成済み