Open Case

はじめに

This guide will help you open the case of your Jura Impressa F50 to get to the inner parts.

必要な工具と部品

手順1 Open Case

Clean the coffee machine before starting as well as possible and remove any remaining coffee bean debris, etc.
Pull the power plug before working on the coffee machine!
Never submerge the coffee machine completely under water.
Remove the drip pan, tray and container for used coffee,...
... the water tank, ...
and the aroma protection cover.

翻訳

手順2

Using an oval head bit remove all four oval head screws from the rear panel.

翻訳

手順3

Remove the two T15 Torx screws from the coffee machine housing cover.

翻訳

手順4

Remove the top cover of the coffee machine.

翻訳

手順5

Remove the panel from the right side.
Slightly lift the side panel at the back and then pull it out backwards with a little effort. Especially when disassembling it for the first time, the force required for this can be quite high.

翻訳

手順6

Remove the left side panel.
A light tap on the back of the recess for the water tank can help to loosen the side panel.

翻訳

終わりに

Do you need help extracting the grinder of your Jura Impressa F50 to service it or replace it? Then check out the guide "Extract and Replace Grinder".

10 の人々がこのガイドを完成させました。

以下の翻訳者の皆さんにお礼を申し上げます:

de en

100%