メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide will show you how to remove the back case of the One Education Infinity:One laptop. This should be used to replace a damaged back cover, or to gain access to internal components for more complex repairs.

  1. Use a spudger to pry the four rubber pads away from the bottom of the case. Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.
    • Use a spudger to pry the four rubber pads away from the bottom of the case.

    • Use a Phillips #00 screwdriver to unscrew the four 6.4 mm screws.

  2. Insert a Jimmy or other prying tool into the seam on the edge of the casing. Trace along the edges of the device until all clips are released.
    • Insert a Jimmy or other prying tool into the seam on the edge of the casing.

    • Trace along the edges of the device until all clips are released.

    • Lift the back case away from the device.

  3. Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.
    • Use a Phillips #00 screwdriver to unscrew the four 6.4mm screws on the hinge mounts.

  4. Use tweezers to lift the fabric cover and hinge connector away from the daughterboard. Always use ESD safe tools when working with delicate electrical components.
    • Use tweezers to lift the fabric cover and hinge connector away from the daughterboard.

    • Always use ESD safe tools when working with delicate electrical components.

終わりに

To reassemble your device, follow these instructions in reverse order.

Taylor Bratsch

メンバー登録日: 2016年09月06日

4,934 ポイント

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 68