One Education Infinity Speakers Replacement

はじめに

This guide will detail how to safely remove the speakers from the One Education Infinity laptop. The model number for the Infinity is A03. This device can be recognized by its dark grey exterior, light grey interior, purple carrying handle, and rotating camera above the screen.

The Infinity was released in Spring 2019 and is NOT the same as the Infinity: One.

必要な工具と部品

手順1 Back Case

One Education Infinity Speakers Replacement, Back Case: 手順 1、 3の画像 1

One Education Infinity Speakers Replacement, Back Case: 手順 1、 3の画像 2

One Education Infinity Speakers Replacement, Back Case: 手順 1、 3の画像 3

Always power off your device before beginning disassembly.
Remove the screw covers and rubber feet from the bottom of the laptop with a metal spudger.

編集

手順2

Using a Phillips #00 screwdriver, remove the sixteen 5.0 mm black screws from the back panel.

編集

手順3

One Education Infinity Speakers Replacement: 手順 3、 3の画像 3

Using the iFixit plastic opening tool or spudger, start near the white hinge of the device and lift along the outer edges of the device until all clips are released.
Lift the back case off of the device.
Removing the back may create a loud snapping noise.

編集

手順4 Battery

One Education Infinity Speakers Replacement, Battery: 手順 4、 3の画像 1

One Education Infinity Speakers Replacement, Battery: 手順 4、 3の画像 2

One Education Infinity Speakers Replacement, Battery: 手順 4、 3の画像 3

There may be black tape inside your device covering components or holding down wires. This tape is unimportant for the function of the device, and can be removed.
Carefully wiggle the battery cable to the right and out of the port with a plastic spudger.

編集

手順5

One Education Infinity Speakers Replacement: 手順 5、 3の画像 3

Wedge a plastic spudger underneath the battery from the upper edge and slide it carefully along the length of the battery to separate it from the case.
There is a mild adhesive holding down the battery. Take care not to puncture or excessively bend the battery while freeing it from the adhesive.
Lift the battery out from the internal case.

編集

手順6 Solid State Drive

One Education Infinity Speakers Replacement, Solid State Drive: 手順 6、 3の画像 1

One Education Infinity Speakers Replacement, Solid State Drive: 手順 6、 3の画像 2

One Education Infinity Speakers Replacement, Solid State Drive: 手順 6、 3の画像 3

Use a Phillips #00 screwdriver to remove the single 2mm black screw from the SSD.

編集

手順7

One Education Infinity Speakers Replacement: 手順 7、 3の画像 3

Grab the SSD with your fingers and slide it slowly to the right and out of its port.

編集

手順8 Motherboard

One Education Infinity Speakers Replacement, Motherboard: 手順 8、 2の画像 1

One Education Infinity Speakers Replacement, Motherboard: 手順 8、 2の画像 2

Using your fingers, carefully pull the two ribbon cable locking clips out from their ports.

編集

手順9

Using your fingers, carefully lift up the black tab and then unplug the gold ribbon cable.

編集

手順10

Using a spudger, carefully unplug the black and grey wires by popping them up off the wireless card.

編集

手順11

Using your fingers, carefully unplug the two speaker wires from the motherboard.

編集

手順12

Using your fingers or an iFixit opening tool, carefully lift the black tab on top of the ZIF connector and remove the ribbon cable.

編集

手順13

Using your fingers, carefully lift up the black tab and then unplug the blue ribbon cable.

編集

手順14

Using a Phillips #00 screwdriver, remove the single 4 mm silver screw from beneath the ribbon cable.
Using a Phillips #00 screwdriver, remove the two 2.5 mm black screws.
Using your fingers, carefully lift the motherboard out of the internal panel.