One Education Infinity Battery Replacement

はじめに

This guide will detail how to safely remove the battery from the One Education Infinity laptop. The model number for the Infinity is A03. This device can be recognized by its dark grey exterior, light grey interior, purple carrying handle, and rotating camera above the screen.

The Infinity was released in Spring 2019 and is NOT the same as the Infinity: One.

必要な工具と部品

手順1 Back Case

One Education Infinity Battery Replacement, Back Case: 手順 1、 3の画像 1

One Education Infinity Battery Replacement, Back Case: 手順 1、 3の画像 2

One Education Infinity Battery Replacement, Back Case: 手順 1、 3の画像 3

Always power off your device before beginning disassembly.
Remove the screw covers and rubber feet from the bottom of the laptop with a metal spudger.

編集

手順2

Using a Phillips #00 screwdriver, remove the sixteen 5.0 mm black screws from the back panel.

編集

手順3

One Education Infinity Battery Replacement: 手順 3、 3の画像 3

Using the iFixit plastic opening tool or spudger, start near the white hinge of the device and lift along the outer edges of the device until all clips are released.
Lift the back case off of the device.
Removing the back may create a loud snapping noise.

編集

手順4 Battery

One Education Infinity Battery Replacement, Battery: 手順 4、 3の画像 1

One Education Infinity Battery Replacement, Battery: 手順 4、 3の画像 2

One Education Infinity Battery Replacement, Battery: 手順 4、 3の画像 3

There may be black tape inside your device covering components or holding down wires. This tape is unimportant for the function of the device, and can be removed.
Carefully wiggle the battery cable to the right and out of the port with a plastic spudger.

編集

手順5

One Education Infinity Battery Replacement: 手順 5、 3の画像 3

Wedge a plastic spudger underneath the battery from the upper edge and slide it carefully along the length of the battery to separate it from the case.
There is a mild adhesive holding down the battery. Take care not to puncture or excessively bend the battery while freeing it from the adhesive.
Lift the battery out from the internal case.