メインコンテンツにスキップ

Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing  Replacement, Strap Eyelet Casing: 手順 1、 3の画像 1 Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing  Replacement, Strap Eyelet Casing: 手順 1、 3の画像 2 Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing  Replacement, Strap Eyelet Casing: 手順 1、 3の画像 3
    • Locate the strap eyelet side of the camera and remove the 2 Phillips #00 5.3mm screws in the handle.

    • Using your fingers, take off the handle, the black casing underneath, and gently wiggle out the shiny black casing below that.

  2. Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing  Replacement: 手順 2、 3の画像 1 Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing  Replacement: 手順 2、 3の画像 2 Olympus Stylus Tough TG-2 iHS Strap Eyelet Casing  Replacement: 手順 2、 3の画像 3
    • On the bottom of the camera, remove the single Phillips #00 3.5mm screw from the casing below the grip.

    • Using a plastic opening tool, gently pry the Olympus grip up and remove it.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Amanda

メンバー登録日: 07/20/15

933 ポイント

8のガイドは作成済み

チーム

Eastern Washington University, Team 1-5, Carnegie Fall 2015 Eastern Washington University, Team 1-5, Carnegie Fall 2015人のメンバー

EWU-CARNEGIE-F15S1G5

3 メンバー

16のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 60