メインコンテンツにスキップ

Olympus Pen E-PL7 LCD Screen Replacement

必要な工具と部品

  1. Olympus Pen E-PL7 LCD Screen Replacement, Battery: 手順 1、 2の画像 1 Olympus Pen E-PL7 LCD Screen Replacement, Battery: 手順 1、 2の画像 2
    • Turn the camera upside down.

    • Push the grey tab to the right to open the battery compartment.

    • Pull out the battery.

    • The battery is not shown in these photos.

  2. Olympus Pen E-PL7 LCD Screen Replacement, LCD Screen: 手順 2、 1の画像 1
    • Use a Phillips #00 screwdriver to remove the three 2.3 mm screws from the base of the LCD screen.

  3. Olympus Pen E-PL7 LCD Screen Replacement: 手順 3、 2の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 3、 2の画像 2
    • Fully extend the LCD assembly.

  4. Olympus Pen E-PL7 LCD Screen Replacement: 手順 4、 3の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 4、 3の画像 2 Olympus Pen E-PL7 LCD Screen Replacement: 手順 4、 3の画像 3
    • Remove the two 2.2 mm Phillips screws located on the back of the LCD screen.

    • Use tweezers to remove the top LCD bracket.

  5. Olympus Pen E-PL7 LCD Screen Replacement: 手順 5、 3の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 5、 3の画像 2 Olympus Pen E-PL7 LCD Screen Replacement: 手順 5、 3の画像 3
    • Use a Phillips #00 screwdriver to remove the four 1.4 mm screws from the back of the LCD screen.

    • Remove the LCD ribbon cable with a pair of tweezers.

    • The cover may fall off after the screws have been removed.

  6. Olympus Pen E-PL7 LCD Screen Replacement: 手順 6、 3の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 6、 3の画像 2 Olympus Pen E-PL7 LCD Screen Replacement: 手順 6、 3の画像 3
    • Carefully lift the LCD screen up and away from the assembly.

    • Do not attempt to fully remove the screen, as it is attached to the assembly by a ribbon cable.

  7. Olympus Pen E-PL7 LCD Screen Replacement: 手順 7、 2の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 7、 2の画像 2
    • Use tweezers to peel back the plastic cover.

  8. Olympus Pen E-PL7 LCD Screen Replacement: 手順 8、 3の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 8、 3の画像 2 Olympus Pen E-PL7 LCD Screen Replacement: 手順 8、 3の画像 3
    • Use a spudger to flip back the black bar on the LCD Ribbon ZIF connector.

  9. Olympus Pen E-PL7 LCD Screen Replacement: 手順 9、 2の画像 1 Olympus Pen E-PL7 LCD Screen Replacement: 手順 9、 2の画像 2
    • Gently pull the ribbon cable out with tweezers.

  10. Olympus Pen E-PL7 LCD Screen Replacement: 手順 10、 1の画像 1
    • Remove the LCD Screen.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

Kelsea Weber

メンバー登録日: 11/12/15

19,873 ポイント

32のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

135 メンバー

16,817のガイドは作成済み

7 件のコメント

Magnifico

Great Work!!

apuntotres - 返信

Where can I buy a replacement LCD screen?

Joshua Almeida - 返信

You don't show the final part taking the glass away from outer and the board, as the screen replacements don't come with connector board

josollis - 返信

@josollis: Thanks for the hint! I got the missing info from the E-P5 LCD exchange instructions (on ifixit).

Stephan Fagerer - 返信

I have reassembled the unit after replacing the broken Ribbon, however my LCD images are inverted in normal mode not selfie mode. Do anyone know why ?

Thanks in advance

ah to lee - 返信

コメントを追加

統計データ:

過去 24時間: 2

過去 7 日: 17

過去 30 日: 82

今までの合計 9,840