Olympus Digital Camera TG-3 Front Case Replacement

はじめに

This guide requires you to handle sharp metal objects. Proceed with caution. To avoid misplacing the screws hold them in place with masking tape. Make sure your hands are clean and dry before they come in contact with the internal parts of the camera.

必要な工具と部品

手順1 Front Case

Olympus Digital Camera TG-3 Front Case Replacement, Front Case: 手順 1、 1の画像 1

Locate the strap eyelet side of the camera and use the PH000 screwdriver to remove the two 5.3mm screws that hold the strap.

編集

手順2

Locate the side of the camera containing the HDMI port. Use the PH000 screwdriver to remove the 5.4mm screw located on the lower left side below the port.

編集

手順3

Using the PH000 screwdriver, remove the 3.8mm screw located inside the HDMI port.

編集

手順4

Locate the bottom section of the camera. Using the PH000 screwdriver, remove the two 4mm screws located towards the middle (near the battery compartment).

編集