メインコンテンツにスキップ

Oculus Rift CV1 Facial Interface Replacement

必要な工具と部品

  1. Oculus Rift CV1 Facial Interface Replacement, Facial Interface: 手順 1、 1の画像 1
    • Pull firmly from the top of the headset facial interface to remove the foam frame.

  2. Oculus Rift CV1 Facial Interface Replacement: 手順 2、 1の画像 1
    • Remove the six T3 4mm screws from the top and bottom edges of the case.

  3. Oculus Rift CV1 Facial Interface Replacement: 手順 3、 1の画像 1
    • Insert the spudger underneath the edge of the lens on the left or right side.

    • Slide the spudger upwards and around the edge of the frame to undo the tabs underneath.

    • Repeat for the other side of the frame.

  4. Oculus Rift CV1 Facial Interface Replacement: 手順 4、 3の画像 1 Oculus Rift CV1 Facial Interface Replacement: 手順 4、 3の画像 2 Oculus Rift CV1 Facial Interface Replacement: 手順 4、 3の画像 3
    • Lift up the frame to see a tab hidden underneath the lycra mesh along the edge of the lens.

    • Pull up on the tab with the spudger.

    • Repeat for the corresponding tab on the other lens.

  5. Oculus Rift CV1 Facial Interface Replacement: 手順 5、 1の画像 1
    • Lift up on the plastic frame around the lens.

    • Slide a finger around the inside edge, pulling outward from the center of the lens to release the other tabs.

    • Repeat for the frame on the other lens.

  6. Oculus Rift CV1 Facial Interface Replacement: 手順 6、 1の画像 1
    • Pull up along the outer frame.

    • Remove the facial interface.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Kyle Anderson

メンバー登録日: 01/24/19

226 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team S18-G4, White Winter 2019 Cal Poly, Team S18-G4, White Winter 2019人のメンバー

CPSU-WHITE-W19S18G4

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 46

今までの合計 4,641