Skip to main content

Introduction

This guide will walk you through the process of opening the Back Panel to your Nvidia Shield Tablet K1.

Parts

No parts specified.

  1. Starting at the Micro SD Card Slot and using the blue plastic opening tool, begin to maneuver the tool around the edges while applying light pressure to lift the panel upwards.
    • Starting at the Micro SD Card Slot and using the blue plastic opening tool, begin to maneuver the tool around the edges while applying light pressure to lift the panel upwards.

  2. There are clips holding the back panel to the rest of the case. You must apply some force to lift the back panel off. Continue lifting up the panel all the way around the edges of the tablet.
    • There are clips holding the back panel to the rest of the case. You must apply some force to lift the back panel off.

    • Continue lifting up the panel all the way around the edges of the tablet.

    • Once all of the panel clips are unfastened, gently remove the back panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

7 other people completed this guide.

Ryan Butler

Member since: 2016年02月09日

1,512 Reputation

9 Guides authored

Team

iFixit, Team 1-1, Weber Winter 2016 Member of iFixit, Team 1-1, Weber Winter 2016

FIX-WEBER-W16S1G1

4 Members

26 Guides authored

2 Comments

Hello, I’m planning on replacing the battery on my K1 soon, will the rear panel snap back in?

Scott - 返信

but wait theres flex cable your not showing thats attached to the cover it could be ripped off and bricked like mine because no one know the name of said cable

Christian Rogers - 返信

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 22

All Time: 4,366