はじめに
Suctions cups at the bottom of the base can deteriorate over time. This guide will demonstrate how to replace them.
必要な工具と部品
-
この手順で使用する道具:TR8 Torx Security Screwdriver$5.99
-
Turn the blender upside down.
-
Remove the six screws securing the bottom panel to the base of the blender:
-
Four 0.5 inch 5 gauge Phillips screws
-
Lift the bottom off of the base.
-
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.