メインコンテンツにスキップ

Numark N4 BP Main PCB Board Replacement

必要な工具と部品

  1. Numark N4 BP Main PCB Board Replacement, Numark N4 Disassembly: 手順 1、 1の画像 1
    • Turn the Numark N4 over so that the bottom panel is facing upwards.

    • Loosen and remove the 17 12mm screws from the bottom panel using a Phillips #2 screwdriver.

  2. Numark N4 BP Main PCB Board Replacement: 手順 2、 1の画像 1
    • Using your fingers, gently pull apart the two panels of the device until you feel resistance from the cables.

  3. Numark N4 BP Main PCB Board Replacement: 手順 3、 1の画像 1
    • Using your fingers, gently unplug the larger ribbon cable as pictured.

  4. Numark N4 BP Main PCB Board Replacement: 手順 4、 1の画像 1
    • Using your fingers, gently unplug the smaller ribbon cable as pictured.

  5. Numark N4 BP Main PCB Board Replacement: 手順 5、 1の画像 1
    • Using your fingers, gently unplug the yellow and red cable as pictured.

  6. Numark N4 BP Main PCB Board Replacement: 手順 6、 1の画像 1
    • Open the two panels completely, gently placing each side on your working area to avoid damage to the buttons on the outside face.

  7. Numark N4 BP Main PCB Board Replacement, Numark N4 BP Main PCB Board: 手順 7、 1の画像 1
    • Loosen and remove the five 12mm screws from the circuit board using a Phillips #2 screwdriver.

  8. Numark N4 BP Main PCB Board Replacement: 手順 8、 1の画像 1
    • Carefully remove the circuit board from its housing.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Erik Charlton

メンバー登録日: 10/10/17

789 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team S13-G11, Cagle Fall 2017 USF Tampa, Team S13-G11, Cagle Fall 2017人のメンバー

USFT-CAGLE-F17S13G11

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 8

過去 30 日: 17

今までの合計 1,267