Nostalgia Chocolate Fondue Fountain CFF965 Disassembly

はじめに

This guide will show you how to safely disassemble the Nostalgia Chocolate Fondue Fountain (model number CFF965). After the disassembly process, you will be able to access the contents of the fountain’s base (the switch, motor, heating plate, and thermostat) in addition to the tower, auger, and bowl.

Before starting disassembly, make sure that your device is clean from any chocolate (or other food or liquid) and that it is unplugged. No special skills are needed for this project.

必要な工具と部品

手順1 Nostalgia Chocolate Fondue Fountain CFF965 Disassembly

Nostalgia Chocolate Fondue Fountain CFF965 Disassembly, Nostalgia Chocolate Fondue Fountain CFF965 Disassembly: 手順 1、 1の画像 1

Lift the tiered tower away from the base bowl with your hands to remove it.

編集

手順2

Lift the auger up and away from the base bowl by hand to remove it.

編集

手順3

Flip the base over.
Unscrew the 21.3 mm "feet" screws by hand.

編集

手順4

Nostalgia Chocolate Fondue Fountain CFF965 Disassembly: 手順 4、 3の画像 3

Unscrew the three 14.2 mm screws with a Phillips #2 screwdriver.
Unscrew the 9.1 mm screw near the switch with a Phillips #2 screwdriver.
Unscrew the two 14.2 mm spanner screws using a spanner screwdriver (size 6).

編集

手順5

Pull up on the baseplate by hand to remove it.
Pull the switch component up by hand.

編集

手順6

Unscrew the two 22.1 mm machine screws that secure the motor with a Phillips #2 screwdriver.
Remove their adjoining 5.9 mm washers by hand.

編集

手順7

Nostalgia Chocolate Fondue Fountain CFF965 Disassembly: 手順 7、 3の画像 3

Unscrew the three 25.4 mm Phillips #2 sheet metal screws that connect the base bowl to the white plastic structure.
When unscrewing, make sure to hold the metal tower studs on the opposite side of the base bowl (see the second picture). This will make it easier to unscrew the screws.
Flip the base over and remove the base bowl by hand.

編集

手順8

Flip the base over again to view the motor and fan.
Unscrew the remaining four 14.2 mm Phillips #2 sheet metal screws on the white plastic structure.

編集

手順9

Nostalgia Chocolate Fondue Fountain CFF965 Disassembly: 手順 9、 3の画像 3

Flip the entire base over.
Lift up the metal heater plate by hand.
Remove the top of the white plastic box by hand.
The top of the white box should have a white gear and metal axis attached as well.