メインコンテンツにスキップ

はじめに

This guide will help you replace the handset in your Nortel Networks i2004 IP telephone. You may need to replace your handset if the microphone or speaker in the handset is not working.

  1. Turn the phone over to view the underside, where the handset cord connects. Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling straight out.
    • Turn the phone over to view the underside, where the handset cord connects.

    • Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling straight out.

  2. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  3. Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out. Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out.
    • Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out.

  4. Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.
    • Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.

まとめ

To reassemble your device, follow these instructions in reverse order.

Morgan Zandonella

メンバー登録日: 2012年01月22日

49 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 10-35, Amido Winter 2012 Cal Poly, Team 10-35, Amido Winter 2012人のメンバー

CPSU-AMIDO-W12S10G35

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 1,145