メインコンテンツにスキップ

Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement

必要な工具と部品

ビデオの概要

  1. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement, Touch screen / Digitizer, LCD Display: 手順 1、 2の画像 1 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement, Touch screen / Digitizer, LCD Display: 手順 1、 2の画像 2
    • Switch off the phone and remove the battery.

  2. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 2、 3の画像 1 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 2、 3の画像 2 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 2、 3の画像 3
    • Remove 8x Torx T5 screws.

    • With a plastic tool, start with separating the middle frame from the down side.

  3. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 3、 2の画像 1 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 3、 2の画像 2
    • The Loudspeaker is on the middle frame.

    • Disconnect the LCD Display flex cable.

    • Disconnect the Touch screen flex cable.

  4. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 4、 3の画像 1 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 4、 3の画像 2 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 4、 3の画像 3
    • The Logic board is held by 2x locking clips at the bottom side.

    • Release it and gently remove it from the front frame.

  5. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 5、 3の画像 1 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 5、 3の画像 2 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 5、 3の画像 3
    • Put tape on the glass to not scatter pieces.

    • Worm the glass to melt the adhesive.

    • Use plastic tools to separate the touchscreen from the frame.

  6. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 6、 3の画像 1 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 6、 3の画像 2 Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 6、 3の画像 3
    • After separating, clean up the sticker that remains on the borders.

    • New line.Install the new touchscreen and reassemble the device.

  7. Nokia Lumia 610 Touch screen / Digitizer, LCD Display Replacement: 手順 7、 1の画像 1
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

ZFix

メンバー登録日: 12/09/13

191,055 ポイント

330のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

322 メンバー

2,506のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 8

今までの合計 1,866