メインコンテンツにスキップ

はじめに

Installing a new vibration component is necessary when the vibrate mode on your phone is no longer functioning properly. Installation requires no prior knowledge of mobile phone vibrators.

パーツ

パーツは指定されていません。

  1. Locate the small button on the top of the phone. Depress the button. With your other hand, pull the front cover away from the phone.
    • Locate the small button on the top of the phone.

    • Depress the button.

    • With your other hand, pull the front cover away from the phone.

  2. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  3. Remove all six 5.3 mm long T6 screws. Remove the circuit board/faceplate sub-assembly from the back of the phone. Take care to place screws in a safe location.
    • Remove all six 5.3 mm long T6 screws.

    • Remove the circuit board/faceplate sub-assembly from the back of the phone.

    • Take care to place screws in a safe location.

  4. After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism. Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone. Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.
    • After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism.

    • Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Parker Niebauer

メンバー登録日: 2012年10月22日

1 ポイント

6のガイドは作成済み

チーム

Clemson, Team 15-3, Benson Fall 2012 Clemson, Team 15-3, Benson Fall 2012人のメンバー

CLEM-BENSON-F12S15G3

3 メンバー

21のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 395