メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide is a step by step process to remove the battery of the phone. It is a preliminary step to many installation guides.

パーツ

パーツは指定されていません。

  1. Turn off the phone.
    • Turn off the phone.

    • Check if there is a microSD card in the slot behind the door on the side. If so, remove it by first pushing it in, then pulling it out.

    • Position the phone so that the back side is in view.

  2. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  3. Remove the back battery cover. Apply pressure on the cover while simultaneously sliding the cover downward. Apply pressure on the cover while simultaneously sliding the cover downward.
    • Remove the back battery cover.

    • Apply pressure on the cover while simultaneously sliding the cover downward.

  4. Insert the iPod opening tool between the base of the phone and the phone battery. Position the phone so that the battery won't fall out of the phone. The battery lifts out of the phone fast and easily.
    • Insert the iPod opening tool between the base of the phone and the phone battery.

    • Position the phone so that the battery won't fall out of the phone.

    • The battery lifts out of the phone fast and easily.

    • Carefully lift the battery out of the phone.

終わりに

To reassemble your device, follow these instructions in reverse order.

Andrea

メンバー登録日: 2010年04月15日

70 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 26-30, Regan Spring 2010 Cal Poly, Team 26-30, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S26G30

4 メンバー

17のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 3,695