メインコンテンツにスキップ

はじめに

This guide will provide you with a step by step instructions on how to replace the motherboard.

  1. Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool. Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.
    • Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.

  2. There is a molded notch in the white frame of the phone near the top right of the battery.  Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device. This specific device did not come with a battery.
    • There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.

    • This specific device did not come with a battery.

  3. Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame. Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it. Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.
    • Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.

    • Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.

  4. Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell. Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell. Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.
    • Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Aaron LeBlanc

メンバー登録日: 2018年10月24日

501 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team S3-G3, Peak Fall 2018 UMass Dartmouth, Team S3-G3, Peak Fall 2018人のメンバー

UMASSD-PEAK-F18S3G3

3 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 10

今までの合計 335