メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 1の画像 1
    • Make sure your phone is turned off.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 1の画像 1
    • Press the button on the back of the phone and slide the back panel off.

    • Remove the battery by pulling it from the phone.

  3. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 3、 1の画像 1
    • Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.

  4. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 4、 1の画像 1
    • Retrieve your SIM card.

  5. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 5、 1の画像 1
    • Separate the front cover from the main body of the phone.

  6. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 6、 1の画像 1
    • Remove the six screws along the edges of the phone.

  7. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 7、 1の画像 1
    • Pull the screen assembly from the base of the phone.

  8. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 8、 1の画像 1
    • Carefully lift the keypad portion of the screen assembly from the circuit board.

  9. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 9、 1の画像 1
    • Separate the screen from the circuit board.

    • Reconnect the ports during reassembly or the screen will not function properly.

    • Remember to reconnect the screen to the circuit board when reassembling!

  10. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 10、 1の画像 1
    • Gently push down on the screen to pop it off of the assembly.

  11. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 11、 1の画像 1
    • When the screen falls out the assembly, two white tabs will fall out with it.

    • When reinstalling the screen, insert the tabs with the slanted side pointing upwards so they slide into the assembly.

ゴール

ある他の人がこのガイドを完成しました。

作成者

4人の作成者と共同で作成されました。

Sterling Fuentes

メンバー登録日: 04/09/10

130 ポイント

8のガイドは作成済み

チーム

Cal Poly, Team 29-64, Johann Spring 2010 Cal Poly, Team 29-64, Johann Spring 2010人のメンバー

CPSU-JOHANN-S10S29G64

3 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 8

過去 30 日: 11

今までの合計 1,770