はじめに

Installing a Wii Remote motherboard requires the removal of the front cover plate and allows access to the B button.

Flip the Wii Remote over so the battery cover faces you. Push up on the bottom tab.
  • Flip the Wii Remote over so the battery cover faces you.

  • Push up on the bottom tab.

  • Remove the battery cover.

コメントを追加する

Remove the first battery by pressing down on the positive end and pulling the battery out.
  • Remove the first battery by pressing down on the positive end and pulling the battery out.

  • Remove the second battery by pushing up on the positive end and pulling the battery out.

コメントを追加する

Using a Tri-wing Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.
  • Using a Tri-wing Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.

  • Repeat with the two bottom screws.

コメントを追加する

With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller. These tabs are breakable. However, if the tabs are broken the controller will still function.
  • With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.

    • These tabs are breakable. However, if the tabs are broken the controller will still function.

  • Open the front plate like a book.

    • Small parts may fall out as you open the front plate.

コメントを追加する

Using the connector port, gently lift the motherboard about 2 cm from the base. Electrostatic discharge may damage the device. Be careful and avoid touching the electronic components as much as possible.
  • Using the connector port, gently lift the motherboard about 2 cm from the base.

    • Electrostatic discharge may damage the device. Be careful and avoid touching the electronic components as much as possible.

コメントを追加する

Grasp the edges of the motherboard and pull it straight away from the case. Grasp the edges of the motherboard and pull it straight away from the case.
  • Grasp the edges of the motherboard and pull it straight away from the case.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

13 の人々がこのガイドを完成させました。

Emily

メンバー登録日: 2013年04月14日

646 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 3-44, Amido Spring 2013 Cal Poly, Team 3-44, Amido Spring 2013人のメンバー

CPSU-AMIDO-S13S3G44

4 メンバー

6のガイドは作成済み

Where do you find a motherboard and how much do they typically cost?

Jeff - 返信

This is useless because you can't just buy a motherboard. May as well buy a new remote for $20

Lisa Cole - 返信

Where can i buy a brand new and original (not fake of course) wii remote for $20?

arttitudesign -

You can buy a first party Wii remote plus for under $50 at Walmart, best buy, or online on Amazon or on Nintendos website

Darren Woloshyn - 返信

What is the dimension is the motherboard? I want to make a custom motherboard for the housing but I haven't managed to get int the wiimote yet as I am waiting for my tri screwdriver

Michael baldwin - 返信

コメントを追加する

統計データを表示:

過去 24時間: 8

過去 7 日: 47

過去 30 日: 178

今までの合計 12,293