Nintendo NES Advantage Start Button Replacement

はじめに

If your Nintendo NES Advantage Model NES-026 Start Button is not being responsive to being pressed, although plugged into NES, you may need to replace the Start Button, using this guide.

The Start Button is an input sensory button used for starting and pausing the game.

必要な工具と部品

手順1 Back Panel

Nintendo NES Advantage Start Button Replacement, Back Panel: 手順 1、 1の画像 1

Remove the four sticky pads from the bottom of the device.
If the pads are stuck, use a spudger to remove them.

編集

手順2

Remove the six 8 mm screws from the bottom of the device with a Phillips #0 screwdriver.
Use your hands to pull the back panel away from the controller.

編集

手順3 Circuit Board

Nintendo NES Advantage Start Button Replacement, Circuit Board: 手順 3、 2の画像 1

Nintendo NES Advantage Start Button Replacement, Circuit Board: 手順 3、 2の画像 2

Remove the three 14 mm screws from the gray cross with a Phillips #0 screwdriver.
Lift the gray component away from the device.

編集

手順4

Lift up the black wire and move it to the side.

編集

手順5

Nintendo NES Advantage Start Button Replacement: 手順 5、 3の画像 3

Remove the two silver knobs on the front of the device.
Unscrew the two silver nuts using a flathead screwdriver.
Remove each silver nut and silver washer using a pair of tweezers.

編集

手順6

Remove the remaining three 8 mm screws on the circuit board with a Phillips #0 screwdriver.
Remove the silver bracket from the top of the circuit board.

編集