はじめに

This guide will demonstrate proper removal of the D-Pad. This is necessary in order to clean or replace it.

パーツ

パーツは必要ありません。

  1. Place the controller (buttons down) on a solid surface.
    • Place the controller (buttons down) on a solid surface.

    • Remove the six 9.2mm Tri-wing Y0 screws that hold the back panel in place.

  2. Gently lift the back panel up, separating it from the front panel.
    • Gently lift the back panel up, separating it from the front panel.

    • Some of the buttons may fall out if they are knocked around.

  3. Grab the Z-button by the peg with tweezers and lift it out of the controller. During re-assembly, make sure the plastic rim and spring fit into the slot provided, or else the case will not shut.
    • Grab the Z-button by the peg with tweezers and lift it out of the controller.

    • During re-assembly, make sure the plastic rim and spring fit into the slot provided, or else the case will not shut.

  4. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  5. Carefully unhook the cable that is looped around the peg.
    • Carefully unhook the cable that is looped around the peg.

  6. Lift the circuit board out of the controller.
    • Lift the circuit board out of the controller.

      • Do not grab the rumble motor to lift the circuit board as shown in the picture. It will in many cases just remove the rumble motor. Instead, grab the edges of the board.

  7. Remove the rubber backing with tweezers.
    • Remove the rubber backing with tweezers.

  8. Use tweezers to grab the center peg of the directional pad and lift it out of its socket.
    • Use tweezers to grab the center peg of the directional pad and lift it out of its socket.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Sean Michel

メンバー登録日: 2013年01月14日

1,493 ポイント

8のガイドは作成済み

チーム

Cal Poly, Team 19-44, Regan Winter 2013 Cal Poly, Team 19-44, Regan Winter 2013人のメンバー

CPSU-REGAN-W13S19G44

4 メンバー

17のガイドは作成済み

統計データを表示:

過去 24時間: 3

過去 7 日: 16

過去 30 日: 65

今までの合計 3,626