メインコンテンツにスキップ

Nintendo DSi XL Stylus Housing Replacement

必要な工具と部品

  1. Nintendo DSi XL Stylus Housing Replacement, Battery: 手順 1、 2の画像 1 Nintendo DSi XL Stylus Housing Replacement, Battery: 手順 1、 2の画像 2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Stylus Housing Replacement: 手順 2、 1の画像 1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Stylus Housing Replacement, Lower Case: 手順 3、 3の画像 1 Nintendo DSi XL Stylus Housing Replacement, Lower Case: 手順 3、 3の画像 2 Nintendo DSi XL Stylus Housing Replacement, Lower Case: 手順 3、 3の画像 3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Stylus Housing Replacement: 手順 4、 1の画像 1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Stylus Housing Replacement: 手順 5、 3の画像 1 Nintendo DSi XL Stylus Housing Replacement: 手順 5、 3の画像 2 Nintendo DSi XL Stylus Housing Replacement: 手順 5、 3の画像 3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Stylus Housing Replacement: 手順 6、 2の画像 1 Nintendo DSi XL Stylus Housing Replacement: 手順 6、 2の画像 2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Stylus Housing Replacement: 手順 7、 2の画像 1 Nintendo DSi XL Stylus Housing Replacement: 手順 7、 2の画像 2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

  8. Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: 手順 8、 3の画像 1 Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: 手順 8、 3の画像 2 Nintendo DSi XL Stylus Housing Replacement, Right Shoulder Button: 手順 8、 3の画像 3
    • Remove the two gold 4.0 mm Phillips screws securing the right shoulder button assembly to the back case.

    • Lift the right shoulder button assembly from the back case.

    • The components of the right shoulder button assembly:

    • Right shoulder button

    • Shoulder button spring

    • Retaining pin

    • Right shoulder button holding panel

  9. Nintendo DSi XL Stylus Housing Replacement, Stylus Housing: 手順 9、 1の画像 1
    • Remove the stylus from its housing on the right side of the DSi XL.

  10. Nintendo DSi XL Stylus Housing Replacement: 手順 10、 3の画像 1 Nintendo DSi XL Stylus Housing Replacement: 手順 10、 3の画像 2 Nintendo DSi XL Stylus Housing Replacement: 手順 10、 3の画像 3
    • Remove the three 4 mm gold Phillips screws securing the stylus housing to the lower case.

    • Using a spudger, lift the stylus housing off the lower case.

    • Remove the stylus housing from the handheld console.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Brett Hartt

メンバー登録日: 04/12/10

127,749 ポイント

143のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

136 メンバー

16,581のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 13

今までの合計 7,707