メインコンテンツにスキップ

はじめに

Prerequisite guide of Nintendo DS Lite lower LCD assembly.

パーツ

パーツは指定されていません。

  1. Use your fingernail or the edge of a plastic opening tool to carefully flip up the lower LCD ribbon cable retaining flap. Make sure you are flipping up the retaining flap, not the socket itself.
    • Use your fingernail or the edge of a plastic opening tool to carefully flip up the lower LCD ribbon cable retaining flap.

    • Make sure you are flipping up the retaining flap, not the socket itself.

    • Pull the lower LCD assembly straight away to separate the lower LCD ribbon cable from its socket on the motherboard.

    • Remove the lower LCD assembly from the motherboard.

    • When reinstalling lower LCD, ensure it has insulation on the back to prevent a short circuit with the motherboard.

まとめ

To reassemble your device, follow these instructions in reverse order.

Matthew Newsom

メンバー登録日: 2010年01月05日

33,330 ポイント

67のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 495