修理を始めるには

修理する権利

ストア

Nintendo 64 Bottom Cover Disassembly

作成者： tonymag28 (そして 4 人のその他投稿者)
  • コメント: 2
  • お気に入り: 17
  • 完了: 17

難易度

普通

手順

17

所要時間

15 - 20 分

セクション

4

フラグ

0

はじめに

This is how you remove the bottom cover

  1. Remove the expansion pack cover by pushing in the tab and pulling out.

    • Remove the expansion pack cover by pushing in the tab and pulling out.

    編集

  2. If your system uses a jumper pack, the same procedure applies to remove it.

    • If your system uses a jumper pack, the same procedure applies to remove it.

    • A small spoon can be used in place of a spudger.

    • Lever the expansion pack out using a metal spudger.

    編集

  3. Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.

    • Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.

    編集

  4. Remove the two front feet of the N64.

    • Remove the two front feet of the N64.

    編集

  5. Rotate to top side up and lift off top cover.

    • Rotate to top side up and lift off top cover.

    編集

  6. Remove the fourteen screws indicated in the example using the larger Phillips screwdriver. Remove the fourteen screws indicated in the example using the larger Phillips screwdriver.

    • Remove the fourteen screws indicated in the example using the larger Phillips screwdriver.

    編集

  8. Remove the metal plate indicated in the example by sliding it back and then lifting it up. Remove the metal plate indicated in the example by sliding it back and then lifting it up.

    • Remove the metal plate indicated in the example by sliding it back and then lifting it up.

    編集

  9. Remove the two screws indicated in the example using the smaller Phillips screwdriver.

    • Remove the two screws indicated in the example using the smaller Phillips screwdriver.

    編集

  10. Remove the screw to the right of the LED light using the larger Phillips screwdriver.

    • Remove the screw to the right of the LED light using the larger Phillips screwdriver.

    編集

  11. Remove the small metal bracket from the back of the expansion pack slot.

    • Remove the small metal bracket from the back of the expansion pack slot.

    編集

  12. Remove the small metal bracket from the front of the expansion pack slot with the metal spudger. Remove the small metal bracket from the front of the expansion pack slot with the metal spudger.

    • Remove the small metal bracket from the front of the expansion pack slot with the metal spudger.

    編集

  13. Remove the small metal bracket behind the expansion slot using the spudger. Remove the small metal bracket behind the expansion slot using the spudger.

    • Remove the small metal bracket behind the expansion slot using the spudger.

    編集

  14. Remove the seven screws indicated in the example using the larger Phillips screwdriver. Remove the seven screws indicated in the example using the larger Phillips screwdriver.

    • Remove the seven screws indicated in the example using the larger Phillips screwdriver.

    編集

  15. Lift off and remove the metal plate as indicated in the example.

    • Lift off and remove the metal plate as indicated in the example.

    編集

  16. Remove the four screws indicated using the #1 Phillips screwdriver.

    • Remove the four screws indicated using the #1 Phillips screwdriver.

    編集

  17. Lift up and remove the motherboard.

    • Lift up and remove the motherboard.

    編集

  18. Remove everything from the bottom cover.

    • Remove everything from the bottom cover.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

17 の人々がこのガイドを完成させました。

作成者

4他の投稿者と一緒に

tonymag28

メンバー登録日: 2009年10月28日

1,934 ポイント

3のガイドは作成済み

バッジ: 13

+10 個以上のバッジ

チーム

Cal Poly, Team 5-4, Regan Fall 2009 Cal Poly, Team 5-4, Regan Fall 2009人のメンバー

CPSU-REGAN-F09S5G4

7 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

コメントを追加

統計データを表示:

過去 24時間: 11

過去 7 日: 69

過去 30 日: 432

今までの合計 29,077