メインコンテンツにスキップ

Nintendo 3DS Motherboard Assembly Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. Nintendo 3DS Motherboard Assembly Replacement, Motherboard Assembly: 手順 1、 2の画像 1 Nintendo 3DS Motherboard Assembly Replacement, Motherboard Assembly: 手順 1、 2の画像 2
    • Grasp the microphone ribbon cable near the microphone with a pair of tweezers.

    • Pull the microphone straight up out of the upper case.

  2. Nintendo 3DS Motherboard Assembly Replacement: 手順 2、 3の画像 1 Nintendo 3DS Motherboard Assembly Replacement: 手順 2、 3の画像 2 Nintendo 3DS Motherboard Assembly Replacement: 手順 2、 3の画像 3
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the speaker assembly ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, NOT the socket itself. Damaging the socket or cable will result in a 3DS that will blink its power LED when you press the power button - and do nothing else.

    • Disconnect the speaker assembly ribbon cable with a pair of tweezers.

  3. Nintendo 3DS Motherboard Assembly Replacement: 手順 3、 2の画像 1 Nintendo 3DS Motherboard Assembly Replacement: 手順 3、 2の画像 2
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the camera ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • When reassembling, note that the gold contacts face toward the motherboard (as opposed to the camera cable's gold contacts facing away).

  4. Nintendo 3DS Motherboard Assembly Replacement: 手順 4、 3の画像 1 Nintendo 3DS Motherboard Assembly Replacement: 手順 4、 3の画像 2 Nintendo 3DS Motherboard Assembly Replacement: 手順 4、 3の画像 3
    • Remove seven Phillips screws securing the motherboard to the upper case:

    • Four 2.5 mm gold screws

    • Two 3.5 mm black screws

    • One 2.5 mm silver screw

    • When you remove this screw the volume slider can fall out.

    • Lift the side of the motherboard that sits along the bottom edge of the 3DS.

  5. Nintendo 3DS Motherboard Assembly Replacement: 手順 5、 3の画像 1 Nintendo 3DS Motherboard Assembly Replacement: 手順 5、 3の画像 2 Nintendo 3DS Motherboard Assembly Replacement: 手順 5、 3の画像 3
    • Continue lifting the motherboard assembly and rotate it until it is resting next to the rest of the device.

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the LCD ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself. Damaging the socket or cable will result in a 3DS that won't have a functional top screen.

  6. Nintendo 3DS Motherboard Assembly Replacement: 手順 6、 1の画像 1
    • Remove the motherboard assembly from the rest of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

David Hodson

メンバー登録日: 04/13/10

150,467 ポイント

127のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,577