メインコンテンツにスキップ

Nintendo 3DS Back Cover Replacement

必要な工具と部品

  1. Nintendo 3DS Back Cover Replacement, Back Cover: 手順 1、 1の画像 1
    • Unscrew the four Phillips #00 screws along the top of the back cover.

    • The screws are held in place by locking washers, and will not come out of the back cover.

    • The comments section is full of unlucky souls who will tell you that the screws here through step 4 will strip incredibly easily. Press down fairly hard, and go slow.

  2. Nintendo 3DS Back Cover Replacement: 手順 2、 2の画像 1 Nintendo 3DS Back Cover Replacement: 手順 2、 2の画像 2
    • Hold the device in one hand and turn it over.

    • Grab the top edge of the back cover with your opposite hand so that the cover does not fall back into place.

    • Flip the 3DS over again so that the back cover is facing up.

    • Pull the back cover up and away from the rest of the device to remove it.

終わりに

To reassemble your device, follow these instructions in reverse order.

18 の人々がこのガイドを完成させました。

作成者

6人の作成者と共同で作成されました。

David Hodson

メンバー登録日: 04/13/10

150,467 ポイント

127のガイドは作成済み

2 件のコメント

Anybody know where to buy replacement back covers for this original 3DS model? I’m finding that a lot of used 3DS’s from this era have 3rd party battery packs and the original cover is lost.

CORED3SIGN - 返信

コメントを追加

統計データ:

過去 24時間: 10

過去 7 日: 92

過去 30 日: 445

今までの合計 25,269