メインコンテンツにスキップ

はじめに

This guide for the Nintendo 2DS will teach you how to access the trigger buttons to remove them for cleaning or replacement.

パーツ

パーツは指定されていません。

  1. Remove the two Phillips screws securing the upper rear panel.
    • Remove the two Phillips screws securing the upper rear panel.

    • The screws will not completely detach from the back panel.

  2. Hinge the upper rear panel upwards and outwards to remove it. Hinge the upper rear panel upwards and outwards to remove it.
    • Hinge the upper rear panel upwards and outwards to remove it.

  3. Remove the battery from its housing by lifting it up from the side closest to the outside edge. Remove the battery from its housing by lifting it up from the side closest to the outside edge. Remove the battery from its housing by lifting it up from the side closest to the outside edge.
    • Remove the battery from its housing by lifting it up from the side closest to the outside edge.

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Remove the ten Phillips screws attaching the rear panel.
    • Remove the ten Phillips screws attaching the rear panel.

  6. The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.
    • The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.

    • Carefully pull the rear panel straight up from the device.

  7. Carefully flip the back panel over to locate the attached ribbon cable.
    • Carefully flip the back panel over to locate the attached ribbon cable.

    • Remove the two Phillips screws attaching the ribbon cable to the rear panel.

    • Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.

  8. The trigger buttons have small springs attached to them, so be careful when removing the buttons from the device. Pull the trigger button away from the device to remove it.
    • The trigger buttons have small springs attached to them, so be careful when removing the buttons from the device.

    • Pull the trigger button away from the device to remove it.

まとめ

To reassemble your device, follow these instructions in reverse order.

13 の人々がこのガイドを完成させました。

Fina Beauchamp

メンバー登録日: 2015年01月12日

2,131 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 70-1, Forte Winter 2015 Cal Poly, Team 70-1, Forte Winter 2015人のメンバー

CPSU-FORTE-W15S70G1

4 メンバー

15のガイドは作成済み

コメント1件

Nice job! My right button was jammed for at least two years. Now I can finally demolish my friends in Mariokart.

Minecrafter Pig - 返信

コメントを追加する

統計データを表示:

過去 24時間: 12

過去 7 日: 83

過去 30 日: 280

今までの合計 13,779