Ninja Professional Blender BL660 Suction Cups on Base Replacement - iFixit 修理ガイド

はじめに

If the blender is too loud, the suction cups may be damaged or loose. This guide will help you to replace damaged suction cups.

必要な工具と部品

手順1 Suction Cups on Base

Ninja Professional Blender BL660 Suction Cups on Base Replacement, Suction Cups on Base: 手順 1、 2の画像 1

Ninja Professional Blender BL660 Suction Cups on Base Replacement, Suction Cups on Base: 手順 1、 2の画像 2

Using the Phillips #1 screwdriver, remove the 5 screws holding the outer base.
Lift the base up to remove it.

手順2

Ninja Professional Blender BL660 Suction Cups on Base Replacement: 手順 2、 2の画像 1

Ninja Professional Blender BL660 Suction Cups on Base Replacement: 手順 2、 2の画像 2

Turn the base panel upside down to reveal the suction cup feet.

手順3

Ninja Professional Blender BL660 Suction Cups on Base Replacement: 手順 3、 1の画像 1

Push the stopper on the suction cup foot through the bottom panel using the iFixit plastic opening tool.

手順4

Ninja Professional Blender BL660 Suction Cups on Base Replacement: 手順 4、 2の画像 1

Ninja Professional Blender BL660 Suction Cups on Base Replacement: 手順 4、 2の画像 2

Once stopper has passed through the bottom panel, pull suction cup foot out.
Replace suction cup feet as needed.
Ninja does not sell suction cup feet. You will need to obtain them from other third party vendors.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Hernan Mendoza

メンバー登録日: 09/22/17

201 ポイント

2のガイドは作成済み

+2 個以上のバッジ

チーム

Central Washington University, Team S1-G1, Pengilly Fall 2017 Central Washington University, Team S1-G1, Pengilly Fall 2017人のメンバー

CWU-PENGILLY-F17S1G1

4 メンバー

9のガイドは作成済み

コメント 1 件

Where did you get the suction cups from?

camoramirez - 2020年9月15日返信

統計データ:

過去 24時間: 0

過去 7 日: 13

過去 30 日: 52

今までの合計 4,801