修理を始めるには コミュニティ ストア

Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement

はじめに

This is very similar to replacing the tubes in the device, which is show in another repair guide created for the ninja coffee bar. Be very careful with the screws because they are very small. We would suggest the magnetic mat provided by iFixit so you don't lose the screws. Just like the tube repair guide, be careful removing the protective plate because there are a lot of wires that can not be disconnected. Also, make sure to take some pictures of the wiring just incase some of them do slip loose.

必要な工具と部品

  1. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement, Valve: 手順 1、 1の画像 1

    • Unscrew eight 6mm screws with Phillips head #1 screwdriver

    • Remove bottom cover

    編集

  3. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: 手順 2、 1の画像 1

    • Unscrew three 6mm screws with Phillips head #1 screwdriver

    • Remover tube protection plate

    編集

  4. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: 手順 3、 2の画像 1 Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: 手順 3、 2の画像 2

    • Detach valve tubes from valve by squeezing pins and pull tubes away from valve

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Naser Aldousari

メンバー登録日: 10/10/17

310 ポイント

3のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

USF Tampa, Team S13-G69, Cagle Fall 2017 USF Tampa, Team S13-G69, Cagle Fall 2017人のメンバー

USFT-CAGLE-F17S13G69

4 メンバー

3のガイドは作成済み

2 件のコメント

Where can I get the replacement water valve?

Mark Peters - 返信

Anyone have a source for the valve?

ErrorCode67 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 13

今までの合計 1,914