Nikon Coolpix S800c Motherboard Replacement Guide

はじめに

In this guide, we will go over the steps to remove the motherboard from a Nikon Coolpix S800c.

必要な工具と部品

手順1 Back Panel/Touch Screen

Nikon Coolpix S800c Motherboard Replacement Guide, Back Panel/Touch Screen: 手順 1、 2の画像 1

Nikon Coolpix S800c Motherboard Replacement Guide, Back Panel/Touch Screen: 手順 1、 2の画像 2

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

編集

手順2

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

編集

手順3 Motherboard

Nikon Coolpix S800c Motherboard Replacement Guide, Motherboard: 手順 3、 1の画像 1

Unscrew all 6 visible screws that secure the motherboard into place using a Phillips head screwdriver (found in iFixit tool kit).

編集

手順4

Pull the shown panel off of the motherboard to expose the Image sensor connection

編集

手順5

Lift tab up to remove the Image sensor connection strip.

編集

手順6

Nikon Coolpix S800c Motherboard Replacement Guide: 手順 6、 3の画像 3

Pull the gray panels back to allow the hidden micro usb and hdmi insert connectors to come free.
Use a Metal Spudger to help with the process to get these connectors free from the frame.

編集

手順7

Using a Metal Spudger, lift the motherboard up from the body of the camera.

編集

手順8

Pull the motherboard off of the main body of the camera.

編集

終わりに

Soldered wires attaching the motherboard to the camera body will need to be disconnected at the motherboard-end and the new wires on the replacement motherboard will need to be soldered on. To reassemble your device, follow these instructions in reverse order.