はじめに
This guide shows how to remove the polarizing lens from the S6300 after removing the battery, the camera front and back covers, and display.
必要な工具と部品
-
-
Place the camera facing upwards.
-
Press down on the battery cover and slide towards the front face of the camera.
-
-
-
Locate the eight outer PH 2mm screws on the device.
-
Using the PH00 screwdriver remove all of the screws from the camera.
-
-
-
-
Remove the clasp from the ribbon cable using the plastic spudger.
-
You may now remove the display.
-
-
-
Remove the four PH00 2.5 mm screws around the edges of the display plate.
-
Remove the three PH00 2 mm screws from the sides of the buttons plate and the 2.5 mm screw from the center of the buttons plate.
-
Lift the buttons plate out of the camera with the plastic tool.
-
Lift the display plate out of the camera with the plastic tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。