Turn the front of the camera toward you.
  • Turn the front of the camera toward you.

コメントを追加する

On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws. On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.
  • On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.

コメントを追加する

On the right side of the camera, remove the first visible screw.
  • On the right side of the camera, remove the first visible screw.

コメントを追加する

Lift the HDMI and A/V OUT cover to access the hidden screw and remove.
  • Lift the HDMI and A/V OUT cover to access the hidden screw and remove.

コメントを追加する

Flip the camera upside down and remove the seven marked screws.
  • Flip the camera upside down and remove the seven marked screws.

コメントを追加する

Remove the two screws hidden underneath the display panel. Remove the two screws hidden underneath the display panel.
  • Remove the two screws hidden underneath the display panel.

コメントを追加する

Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera. Use a plastic opening tool to gently loosen up the sides of the camera.
  • Use a plastic opening tool to gently loosen up the sides of the camera.

コメントを追加する

Carefully open the camera. There are two ribbon cables when opening the camera. Make sure to properly detach them before proceeding. Disassembling Nikon Coolpix P100 Ribbon Cable

コメントを追加する

Now you have partial access to the camera's motherboard.
  • Now you have partial access to the camera's motherboard.

  • Remove the five indicated screws that are attached to the metal plate.

コメントを追加する

Remove the hidden top screw that is attached to the metal plate.
  • Remove the hidden top screw that is attached to the metal plate.

コメントを追加する

Use a plastic opening tool to carefully loosen the metal plate. Remove the panel to access the camera's motherboard. Remove the panel to access the camera's motherboard.
  • Use a plastic opening tool to carefully loosen the metal plate.

  • Remove the panel to access the camera's motherboard.

コメントを追加する

Now you have access to the camera's motherboard
  • Now you have access to the camera's motherboard

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Rikki Brown

メンバー登録日: 2015年01月09日

243 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 1-1, Tanski Winter 2015 USF Tampa, Team 1-1, Tanski Winter 2015人のメンバー

USFT-TANSKI-W15S1G1

3 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 4

過去 30 日: 18

今までの合計 841