修理を始めるには コミュニティ ストア

Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement

はじめに

This guide describes the steps necessary to remove and replace the LCD Monitor Connecting Arm of a Nikon Coolpix L830 camera.

必要な工具と部品

  1. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement, Back Casing: 手順 1、 1の画像 1

    • Use a Phillips #000 screwdriver to unscrew the two 3.0mm Phillips screws located on the side of the camera with the HDMI port.

    • The HDMI port side will be on the left if you are looking at the back of the camera with the LCD monitor.

    • One screw is located under the gray flap.

    編集

  2. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 2、 1の画像 1

    • Unscrew the five 3.0mm Phillips #000 screws that are located on the bottom side of the camera.

    編集

  3. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 3、 1の画像 1

    • Unscrew the 4.0mm Phillips #000 screw located underneath the grey flap on the side of the camera with the "DC IN 5.0 V" marker.

    • This will be on the right if you are looking at the back LCD monitor side.

    • Unscrew the exposed 3.0mm Phillips #000 screw on the same side.

    編集

  5. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 4、 1の画像 1

    • Press the flash button to open the flash component.

    • Remove the 3.0mm Phillips #000 screw located directly in-between the two arms.

    編集

  6. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 5、 1の画像 1

    • Open the LCD monitor to reveal two 2.0mm Phillips screws.

    • Remove the 2.0mm Phillips #000 screws.

    編集

  7. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 6、 2の画像 1 Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 6、 2の画像 2

    • Make sure to open the plastic grey flaps on either side of the camera before proceeding with this step.

    • Insert a plastic opening tool between the back and front surface components of the camera.

    • Wiggle the plastic opening tool backwards and forwards along the top edge until the back surface comes off.

    • Remove the back casing gently to not damage the LCD ribbon connector or inner camera components.

    編集

  8. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 7、 2の画像 1 Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 7、 2の画像 2

    • Gently pull the LCD ribbon connector up to allow the back casing to be completely removed.

    編集

  9. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement, LCD Connecting Arm: 手順 8、 1の画像 1

    • On the inside of the back cover, remove the two 2.0mm Phillips screws surrounding the connecting cable.

    編集

  10. Nikon Coolpix L830 LCD Monitor Connecting Arm Replacement: 手順 9、 1の画像 1

    • Gently pull the ribbon connector in order to remove the complete LCD Monitor Connecting Arm.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Alex Delony

メンバー登録日: 11/01/16

184 ポイント

1ガイドが承認済み

バッジ: 6

+3 個以上のバッジ

チーム

Baylor, Team 4-4, Williams Fall 2016 Baylor, Team 4-4, Williams Fall 2016人のメンバー

BU-WILLIAMS-F16S4G4

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 3

今までの合計 475