メインコンテンツにスキップ

はじめに

Use this guide to replace the LCD.

パーツ

パーツは指定されていません。

  1. Clearly visible damage to the LCD. It did not even light up. Remove the screw from the right side. Remove the visible screw from the left side.
    • Clearly visible damage to the LCD. It did not even light up.

    • Remove the screw from the right side.

    • Remove the visible screw from the left side.

  2. Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers... Remove the three screws from the bottom. Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.
    • Open the USB A/C cover, there is one more screw that needs to be removed. That is why it is important to always remove all covers...

    • Remove the three screws from the bottom.

    • Start splitting the case from the battery compartment. I used an opening tool, but fingernails will be sufficient as well.

  3. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  4. After the splitting of the case, the LCD is imediately visible. Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected. Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.
    • After the splitting of the case, the LCD is imediately visible.

    • Lift the LCD out of the frame by using your fingernail or an opening tool. Do not remove it yet, it is still connected.

    • Flip the black clasp up by using fingernails or the opening tool. No big force is required. Remove the old LCD.

  5. Here is the new screen, note the blue tab. This is the screen protector, remove it after installation. Reassemble in reverse order. Hopefully your results will be the same as for me.
    • Here is the new screen, note the blue tab. This is the screen protector, remove it after installation.

    • Reassemble in reverse order. Hopefully your results will be the same as for me.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

oldturkey03

メンバー登録日: 2010年09月29日

604,992 ポイント

103のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 14

今までの合計 2,389