Skip to main content

はじめに

This guide will outline how to remove a dead battery, as well as how to properly install a new one.

ツール

ツールは指定されていません。

    • At the top of the camera, turn the Mode dial to OFF.

  1. Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.
    • Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.

    • To open the battery compartment, push the latch underneath the word BATTERY to the left.

  2. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  3. Lift the battery compartment cover and remove the old battery.
    • Lift the battery compartment cover and remove the old battery.

  4. Insert the new battery as shown on the underside of the compartment lid.
    • Insert the new battery as shown on the underside of the compartment lid.

  5. Flip the battery compartment lid closed and push the latch to the right.
    • Flip the battery compartment lid closed and push the latch to the right.

    • Flip the camera so that the bottom rests on the table.

    • Turn the Mode dial to [A] to verify that the control panel shows a full power indicator.

まとめ

To reassemble your device, follow these instructions in reverse order.

Cory Layman

メンバー登録日: 2011年10月04日

89 ポイント

3のガイドは作成済み

チーム

UW Stout, Team 1-5, Zhou Fall 2011 UW Stout, Team 1-5, Zhou Fall 2011人のメンバー

UWSTOUT-ZHOU-F11S1G5

5 メンバー

3のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 1,479