Nikon COOLPIX S9500 Outer Case Replacement - iFixit 修理ガイド

はじめに

In order to access any of the inner parts of the camera, the outer case must be taken apart first. [PREREQUISITE ONLY]

必要な工具と部品

手順1 Removing Screws

Nikon COOLPIX S9500 Outer Case Replacement, Removing Screws: 手順 1、 1の画像 1

Remove the three 4 mm screws from the bottom of the camera using a #00 Phillips screwdriver.
Remove the single 3.5 mm screw from the bottom of the camera using a #00 Phillips screwdriver.

手順2

Nikon COOLPIX S9500 Outer Case Replacement: 手順 2、 2の画像 1

Nikon COOLPIX S9500 Outer Case Replacement: 手順 2、 2の画像 2

With the bottom of the camera facing you, slide the latch on the compartment to the left.
Swing the battery compartment door open.
Remove the 3.5 mm screw from the inside with a #00 Phillips screwdriver.

手順3

Nikon COOLPIX S9500 Outer Case Replacement: 手順 3、 1の画像 1

With the screen facing you, locate the two 3.5 mm screws on the left face of the camera. Remove them using a #00 Phillips screwdriver.

手順4

Nikon COOLPIX S9500 Outer Case Replacement: 手順 4、 1の画像 1

With the screen facing you, locate the three 3.5 mm screws on the right face of the camera. Remove them with a #00 Phillips screwdriver.
Two of the screws are located under the port tabs.

手順5

Nikon COOLPIX S9500 Outer Case Replacement: 手順 5、 2の画像 1

Nikon COOLPIX S9500 Outer Case Replacement: 手順 5、 2の画像 2

Locate the crease where the case comes together.
Using a plastic prying tool, pry at the line to remove the camera case.
It may take several attempts to remove the case. Remember to pry at all the crease locations on the camera, and not just one spot.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Jim Bui

メンバー登録日: 01/20/15

811 ポイント

6のガイドは作成済み

+10 個以上のバッジ

チーム

USF Tampa, Team 1-4, Blackwell Winter 2015 USF Tampa, Team 1-4, Blackwell Winter 2015人のメンバー

USFT-BLACKWELL-W15S1G4

4 メンバー

12のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 49