メインコンテンツにスキップ

Nike SportWatch GPS Front Panel Replacement

必要な工具と部品

  1. Nike SportWatch GPS Front Panel Replacement, Front Panel: 手順 1、 1の画像 1
    • Face the watch upside down so that the back of the watch is exposed. Unscrew the six size #000 5 mm long screws on the back using a size 000 Phillips head screwdriver.

  2. Nike SportWatch GPS Front Panel Replacement: 手順 2、 1の画像 1
    • Carefully separate the watch by pulling the band away from the main board.

  3. Nike SportWatch GPS Front Panel Replacement: 手順 3、 1の画像 1
    • Two size #000 2.5 mm long screws will appear at the top of the main board. Unscrew them using a size 000 Phillips head screwdriver.

  4. Nike SportWatch GPS Front Panel Replacement: 手順 4、 1の画像 1
    • Carefully use the blue plastic opening tool to pry the main board out of the front panel.

    • Make sure to be gentle so the ribbon cable that connects to the band does not break, it is fragile and not removable.

  5. Nike SportWatch GPS Front Panel Replacement: 手順 5、 1の画像 1
    • Use an iOpener that has been heated in the microwave for about a minute, or until warm. Place it on the front screen of the watch. Let it rest there for a minute.

    • If you are unfamiliar with this tool use the iOpener guide here

  6. Nike SportWatch GPS Front Panel Replacement: 手順 6、 1の画像 1
    • Push the panel out from the back of the screen, using your fingers.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Ian Eichorn

メンバー登録日: 10/22/15

678 ポイント

4のガイドは作成済み

チーム

UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-8, Gulbrandsen Fall 2015人のメンバー

UMASSD-GULBRANDSEN-F15S5G8

3 メンバー

5のガイドは作成済み

コメント 1 件

Where I can find the replacement glass? regards

Erick Sobreiro - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 1,253