メニュー

あなたの設定

私のワークベンチ

お持ちのデバイス用の修理ガイド、交換用パーツやアンサーフォーラムにアクセスする。
カート

カートには何も入っていません。

当社のショップを閲覧する

Nexus 7 Rear Panel Replacement

作成者： Walter Galan (そして 5 人のその他投稿者)
  • コメント: 3
  • お気に入り: 13
  • 完了: 19

難易度

簡単

手順

5

所要時間

1 - 5 分

セクション

1

フラグ

0

はじめに

Use this guide to replace the Rear Panel.

ツール

これらのツールを購入する

パーツ

これらのパーツを購入する

  1. In the following steps you will release the clips (highlighted in red) along the perimeter of the Nexus 7's rear panel.

    • In the following steps you will release the clips (highlighted in red) along the perimeter of the Nexus 7's rear panel.

    • Do not use excessive force while prying the clips. They can be easily broken.

    翻訳

  2. Gently insert a plastic opening tool near the top of the Nexus 7 between the rear panel and the front panel assembly. Carefully run the plastic opening tool along the top edge to pry the rear panel away from the front panel assembly of the Nexus 7.

    • Gently insert a plastic opening tool near the top of the Nexus 7 between the rear panel and the front panel assembly.

    • Carefully run the plastic opening tool along the top edge to pry the rear panel away from the front panel assembly of the Nexus 7.

    翻訳

  3. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する

  4. Insert the plastic opening tool between the rear panel and the front panel assembly near the power button and pry up at several points along the right edge of the Nexus 7. Insert the plastic opening tool between the rear panel and the front panel assembly near the power button and pry up at several points along the right edge of the Nexus 7. Insert the plastic opening tool between the rear panel and the front panel assembly near the power button and pry up at several points along the right edge of the Nexus 7.

    • Insert the plastic opening tool between the rear panel and the front panel assembly near the power button and pry up at several points along the right edge of the Nexus 7.

    翻訳

  5. Pry up the rear panel along the left edge using the method described in previous steps. Pry up the rear panel along the left edge using the method described in previous steps. Pry up the rear panel along the left edge using the method described in previous steps.

    • Pry up the rear panel along the left edge using the method described in previous steps.

    翻訳

  6. Gently lift and remove the rear panel up off the front panel assembly. Gently lift and remove the rear panel up off the front panel assembly.

    • Gently lift and remove the rear panel up off the front panel assembly.

    翻訳
まとめ

To reassemble your device, follow these instructions in reverse order.

19 の人々がこのガイドを完成させました。

作成者

5他の投稿者と一緒に

Walter Galan

588,484 ポイント

1,203のガイドは作成済み

バッジ: 53

+50 個以上のバッジ

0コメント

コメントを追加

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 17

過去 30 日: 80

今までの合計 49,591