修理を始めるには コミュニティ ストア

Nerf N-Strike Elite Strongarm Barrel Replacement

はじめに

This guide will show how to remove the barrel from the blaster. A good test to check if the barrel is stuck is shown in Step 6 (we suggest to do this before opening the blaster).

必要な工具と部品

  1. Nerf N-Strike Elite Strongarm Barrel Replacement, Outer Shell: 手順 1、 2の画像 1 Nerf N-Strike Elite Strongarm Barrel Replacement, Outer Shell: 手順 1、 2の画像 2

    • Lay the Nerf Strongarm on its side, left side facing up.

    編集

  2. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 2、 2の画像 1 Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 2、 2の画像 2

    • Locate the 12 Philips head screws and remove them: Head Diameter= 4.3mm, Thread Pitch= 1mm, Screw Length= 8mm

    編集

  3. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 3、 1の画像 1

    • Before removing the cover, make sure to first remove the cover for the cocking mechanism. The top half is freely removable.

    • The other half of the cocking mechanism is connected with a spring which may slide off the blaster. Be advised this is normal but worth watching to avoid damaging the spring.

    編集

  4. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 4、 1の画像 1

    • At this time, remove the blaster cover to reveal its internals.

    • If the blaster is resting on its side, the barrel may shift slightly as it is leaning on itself (seen in the image). This is normal but should be handled with care to keep the blaster together.

    編集

  6. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 5、 1の画像 1

    • Once the screws have been removed, lift the top half of the gun off.

    • Notice, the gray colored piece must be removed first in order for the larger half to be removed.

    • Take care and try not to lose any smaller pieces as you open it up.

    • Locking tab for attachments.

    編集

  7. Nerf N-Strike Elite Strongarm Barrel Replacement, Barrel: 手順 6、 1の画像 1

    • Start by inspecting the barrel closer for broken components.

    • Pressing the unloading button is a good test to check if the barrel will rotate out.

    • If the barrel fails to cooperate, continue onto the next steps.

    編集

  8. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 7、 1の画像 1

    • Once the cover is off, the barrel component will be free and removable.

    編集

  9. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 8、 1の画像 1

    • Once the barrel is removed, continue by removing the front shaft. This component is also independent of the blaster and does not require tools.

    編集

  10. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 9、 1の画像 1

    • Look for any signs of debris or any damaged locations that may be causing the barrel to lock.

    編集

  11. Nerf N-Strike Elite Strongarm Barrel Replacement: 手順 10、 1の画像 1

    • At this time, all components interacting with the barrel are removed.

    • Take this time to inspect the barrel for any signs of debris or damaged locations.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Alexander Kim

メンバー登録日: 08/27/15

832 ポイント

3のガイドは作成済み

バッジ: 14

+11 個以上のバッジ

チーム

USF Tampa, Team 5-4, Blackwell Fall 2015 USF Tampa, Team 5-4, Blackwell Fall 2015人のメンバー

USFT-BLACKWELL-F15S5G4

4 メンバー

12のガイドは作成済み

コメント 1 件

hi my barrel keeps ritating and is not fixed and does not stay aligned to the shooting point what shall i do

cryo17 - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 9

過去 30 日: 31

今までの合計 12,186