はじめに

Removing the lower case allows you to replace the hardware inside the device.

Turn the device so that the bottom is facing up.
  • Turn the device so that the bottom is facing up.

コメントを追加する

Use the plastic opening tool to carefully lift the rubber stops in each corner. Do not completely remove the rubber stops, because they are difficult to replace. Do not completely remove the rubber stops, because they are difficult to replace.
  • Use the plastic opening tool to carefully lift the rubber stops in each corner.

  • Do not completely remove the rubber stops, because they are difficult to replace.

コメントを追加する

Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device. Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.
  • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

コメントを追加する

Lift the lower case straight up from the rest of the router. Lift the lower case straight up from the rest of the router.
  • Lift the lower case straight up from the rest of the router.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Nicole Slagle

メンバー登録日: 2013年01月25日

77 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team 3-31, Amido Winter 2013 Cal Poly, Team 3-31, Amido Winter 2013人のメンバー

CPSU-AMIDO-W13S3G31

3 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 3

今までの合計 315