メインコンテンツにスキップ

Munchkinz Volume Button assembly

必要な工具と部品

  1. Munchkinz Volume Button assembly, Opening Device: 手順 1、 1の画像 1
    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

  2. Munchkinz Volume Button assembly, Pry Device Apart: 手順 2、 2の画像 1 Munchkinz Volume Button assembly, Pry Device Apart: 手順 2、 2の画像 2
    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

  3. Munchkinz Volume Button assembly, Separated Device: 手順 3、 1の画像 1
    • After prying the device apart, it should look like this.

  4. Munchkinz Volume Button assembly, Pry Camera: 手順 4、 1の画像 1
    • Use the slim plastic opening tool to pry the camera from its initial position.

  5. Munchkinz Volume Button assembly, Disconnect Ribbon: 手順 5、 1の画像 1
    この手順で使用する道具:
    Tweezers
    $4.99
    購入する
    • Use the precision tweezers to gently disconnect the camera ribbon that is connected to the motherboard.

  6. Munchkinz Volume Button assembly, Volume Button: 手順 6、 1の画像 1
    • Remove the plastic volume button.

  7. Munchkinz Volume Button assembly, Unscrew Module: 手順 7、 1の画像 1
    • Remove the two screws that hold the volume button assembly in place.

  8. Munchkinz Volume Button assembly, Solder Module Wires: 手順 8、 1の画像 1
    • Un-solder the yellow, red, and black wires that connect the volume module to the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

David Wood

メンバー登録日: 02/05/15

440 ポイント

4のガイドは作成済み

チーム

UW Tacoma, Team 3-6, Rose Winter 2015 UW Tacoma, Team 3-6, Rose Winter 2015人のメンバー

UWT-ROSE-W15S3G6

3 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 12

今までの合計 279