メインコンテンツにスキップ

Munchkinz Battery Replacement

必要な工具と部品

  1. Munchkinz Battery Replacement, Opening Device: 手順 1、 1の画像 1
    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

  2. Munchkinz Battery Replacement, Pry Device Apart: 手順 2、 2の画像 1 Munchkinz Battery Replacement, Pry Device Apart: 手順 2、 2の画像 2
    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

  3. Munchkinz Battery Replacement, Separated Device: 手順 3、 1の画像 1
    • After prying the device apart, it should look like this.

  4. Munchkinz Battery Replacement, Removing battery: 手順 4、 3の画像 1 Munchkinz Battery Replacement, Removing battery: 手順 4、 3の画像 2 Munchkinz Battery Replacement, Removing battery: 手順 4、 3の画像 3
    • Use the wide plastic opening tool to slowly pry each side of the battery up.

    • Be careful not to bend the battery too much.

  5. Munchkinz Battery Replacement, Remove battery completely: 手順 5、 1の画像 1
    • Use the Soldering Iron to disconnect the each cable.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Hee Jin Cho

メンバー登録日: 01/14/15

113 ポイント

1ガイドが承認済み

チーム

UW Tacoma, Team 3-6, Rose Winter 2015 UW Tacoma, Team 3-6, Rose Winter 2015人のメンバー

UWT-ROSE-W15S3G6

3 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 10

今までの合計 510