メインコンテンツにスキップ

はじめに

This replacement guide would be useful if your Mr. Coffee BVMC-SJX33GT has a broken or cracked base. It also serves to demonstrate how to get into your coffee maker in order to make other repairs.

Make sure your coffee maker is unplugged and empty of all water before attempting to make any repairs.

パーツ

パーツは指定されていません。

  1. Mr. Coffee BVMC-SJX33GT Base Replacement, Base: 手順 1、 1の画像 1
    • Turn your coffee maker over so that the base is facing up.

  2. Mr. Coffee BVMC-SJX33GT Base Replacement: 手順 2、 2の画像 1 Mr. Coffee BVMC-SJX33GT Base Replacement: 手順 2、 2の画像 2
    • Locate the seven 13.5mm screws securing the base to the coffee maker.

    • Unscrew the screws using a #2 Phillips head screwdriver.

    • Use a screwdriver with a magnetic tip to more easily remove the three screws in the back and two in the middle.

  3. Mr. Coffee BVMC-SJX33GT Base Replacement, security screws: 手順 3、 1の画像 1
    • Also the front two screws are safety screws: they have a 6 sided star shape with a raised dimple in the center to prevent homebodies from casually opening the machine. (probably from the Sunbeam’s (owns Mr. Coffee) legal dept.) Anyway you will need a security bit to remove the screws and not a phillips screw driver.

  4. Mr. Coffee BVMC-SJX33GT Base Replacement: 手順 4、 1の画像 1
    • Lift base to remove.

    • If the base sticks along one edge, do not pull at an angle. Gently tug straight up while sliding a finger along the edge in order to pop the clips.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Mackenzie Aiken

メンバー登録日: 2015年01月27日

1,293 ポイント

6のガイドは作成済み

チーム

San Diego State, Team 1-4, Sheppard Winter 2015 San Diego State, Team 1-4, Sheppard Winter 2015人のメンバー

SDSU-SHEPPARD-W15S1G4

2 メンバー

6のガイドは作成済み

コメント1件

Hi Mackenzie, I'm trying to take off the base of my Mr. Coffee coffeemaker (ISX23GTF). I've found six screws, four were easily removed with Philips screwdriver, but two have star-shaped torx style heads (not certain what they are called). I have three different torx sets, none of which seems to work. The only thing I can think off is trying to drill out the screw, but I am worried about damaging the unit. Any suggestions?

Larry Adams - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 29

今までの合計 2,657